正扬工业技术
产品详情
Aluminum foil combined coil unit / 铝箔合卷机组
产品详情

The aluminum foil coiling unit is the key equipment to ensure the quality of the aluminum foil rolling mill and improve the production efficiency. The technology of spraying double liquid is the most important technology for the success of aluminum foil coiling machine. Its progressiveness directly determines the technical level of the winder, and the quality of its spraying directly affects the quality of the product after the aluminum foil is stacked and rolled.

Therefore, the digital model control technology is developed for the aluminum foil coiler in our company. This technology meets the needs of customers and achieves satisfactory results. The invention patent was obtained in 2010. When used, the speed of the rewinder is input to the control interface. The liquid spraying system can evenly spray the double fluid of the atomization into the double aluminum foil. The basic process is as follows:

Fuel tank controlled element matching atomizer


Electronic control compensation

The equipment is still in the following two aspects of innovation: 1. trimming cutter using small angle bowl dish knife, the knife shaft is combined, to ensure the thickness of 0.012-0.08 foil cutting quality; ironing force 2. controllable, the ironing roller surface is coated by polyurethane roller, ironing roller both ends are provided with a joint bearing and a spring supporting roller, when the compression surface is not flat, with automatic adjustment of bearing surface. The operator can also adjust the ironing force of the two ends at any time according to the actual ironing condition.

Our company has provided two units (1800mm and 1300mm) to customers, and one (1650mm) is being made.


???? ????????? ???? ???? ??????? ????? ???? ??????? ?? ????? ????? ???? ????????? ???? ? ????? ???? ??? ????? ???. ???????? ???? ???? ?? ????? ???????? ????? ?????? ????????? ???? ??? ??? ????? ??? ??????? ?? ?? ??? ?????? ????? ????? ??? ??? ?????? ???? ? ????? ??? ??? ?? ??? ?????? ?? ??? ????? ??????? ???? ???? ?????????.
???? ??? ????? ???? ????????? ???? ??? ?? ??? ?????? ?? ????? ???????? ????? ???? ?? ??? ???????. ??? ?? ???? ??????? ??????? ? ????? ?? ????? ????? ???. ??? ?????? ?????? ?? ??? 1389 ?? ??? ???. ??????? ?? ???? ?? ???? ?????? rewinding ?? ???? ????? ???? ? ????? ????? ?? ??? ????? ?? ?????? ??????? ???? ?????? ???? ???? atomized ?? ???? ????????? ?? ?????. ?????? ????? ?? ??? ??? ???:
???? ???? ????? ????? ??? ??????? ???? ??????? ?????

????? ?????????? ?????
??????? ??? ?? ?? ???? ??? ????? ??? ???: 1. ????? ??? ?? ??????? ?? ???? ??? ???? ???? ????? ?? ???? ????? ??? ??? ?? ????? ???? ??????? ?? ????? ?????? 0.012 0.08 ????? ????????? ????. 2. Controllable ??? ????? ??? ???? ??? ??? ??? ?????? ???? ???? ??? ???? ?? ?? ???? ??? ?? ??????? ????? ? ???? ???????? ????? ??? ?????? ?? ??? ???? ???? ????? ???? ??? ?? ??? ?????? ?? ??? ???? ?? ????? ????? ???. ??????? ?????? ?? ?????? ?? ?? ???? ?? ???? ?? ????? ????? ??? ?? ????? ??? ?? ?? ?? ?????.
???? ?? ????? ??? ??? ??????? ?? ?? (1800 ??????? ? 1300mm)? ? ??? (1650mm) ????? ??? ???.


   铝箔合卷机组是保证铝箔轧机产品质量和提高生产效率的关键设备。而喷双合液技术是铝箔合卷机成败的首要关键技术,它的先进性直接决定了合卷机的技术水平,其喷涂质量直接影响铝箔叠轧后的产品质量。

  为此,我公司铝箔合卷机研制开发了双合液数字模型控制技术。此项技术满足了客户需求,达到了满意效果。于2010年获得了发明专利。使用时将合卷机的速度输入到控制界面中,喷液系统便可将雾化后的双合液随机列速度的升降均匀地喷到双合铝箔之间。其基本过程如下:

油箱 被控元件 匹配 雾化发生器


         电控 补偿

  该设备还在以下两个方面进行了革新:1.切边刀具采用了小角度碗型碟刀,同时将下刀轴改为组合式,保证了厚度为0.012-0.08铝箔的切边质量;2. 可控的熨平力,熨平辊表面为聚氨酯包覆辊,熨平辊两端设置有关节轴承和弹簧支撑,当辊的受压面不平时,可随承压面自动调整。操作者还可根据实际的熨平情况,随时单独调整两端的熨平力。

我公司已向客户提供了两台(1800mm和1300mm),还有一台(1650mm)正在制造之中。



               首龙铝业1800mm铝箔合卷机


 

军马铝业1300mm铝箔合卷机

 


在线客服
 
 
 工作时间
周一至周五 :8:30-17:30
 联系方式
李总:18137968556